R & G SLOANE MANUFACTURING CO. -- FUSE-ON 927 SOLVENT CEMENT FOR PVC PIPE  -- 8040-00F000527
<pre>=====================  Product Identification  =====================

Product ID:FUSE-ON 927 SOLVENT CEMENT FOR PVC PIPE
MSDS Date:01/01/1985
FSC:8040
NIIN:00F000527
MSDS Number: BBGVQ
=== Responsible Party ===
Company Name:R & G SLOANE MANUFACTURING CO.
Emergency Phone Num:213/ 875-0160
CAGE:08717
=== Contractor Identification ===
Company Name:GRIGNARD CO INC
Address:900 PORT READING AVE
Box:City:PORT READING
State:NJ
ZIP:07064-1044
Country:US
Phone:732-541-6661/FAX: 731-541-1916
CAGE:27843
Company Name:R & G SLOANE MANUFACTURING COMPANY
Address:7704 SAN FERNANDO ROAD
Box:City:SUN VALLEY
State:CA
ZIP:91353
Phone:(818) 767-4726
CAGE:08717

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:CYCLOHEXANONE  (SARA III)
CAS:108-94-1
RTECS #:GW1050000
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:DIMETHYLFORMAMIDE
CAS:68-12-2
RTECS #:LQ2100000
OSHA PEL:S, 10 PPM
ACGIH TLV:S, 10 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:TETRAHYDROFURAN  (SARA III)
CAS:109-99-9
RTECS #:LU5950000
OSHA PEL:200 PPM/250 STEL
ACGIH TLV:200 PPM/250STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PVC RESIN, POLYVINYL CHLORIDE RESIN
RTECS #:KV0350000

=====================  Hazards Identification  =====================

Effects of Overexposure:NAUSEA, DIZZINESS, HEADACHE, NARCOSIS,
    IRRITATION OF EYES AND NASAL PASSAGES.

=======================  First Aid Measures  =======================

First Aid:VAPORS: REMOVE TO FRESH AIR AND ASSIST BREATHING IF
    NECESSARY. SKIN: REMOVE CONTAMINATED CLOTHING AND WASH SKIN WITH
    PLENTY OF WATER. FLUSH EYES WITH PLENTY OF WATER AND CALL
    PHYSICIAN. IF SWALLOWED,  DO NOT INDUCE VOMITING, CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:8F, T.C.C.
Lower Limits:1.8
Upper Limits:11.8
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM-ANSUL 'PURPLE K'
Fire Fighting Procedures:CLOSE OR CONFINED QUARTERS: SELF CONTAINED
    BREATHING APPARAT
Unusual Fire/Explosion Hazard:FIRE HAZARD BECAUSE OF LOW FLASH POINTS,
    HIGH VOLATILITY AND HEAVY VAPOR

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. AVOID
    BREATHING OF VAPORS. KEEP LIQUID OUT OF EYES. USH WITH LARGE VOLUME
    OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, AND OPEN
    FLAME. AVOID PROLONGED BREATHING OF VAPOR. USE WITH ADEQTE
    VENTILATION. AVOID CONTACT WITH SKIN.
Other Precautions:STORE BETWEEN 40F AND 110F. FOLLOW PRECAUTIONARY
    INFORMATION GIVEN ON CONTAINER LABEL. ALL HANDLING EQUIPMENT SHOULD
    BE ELECICALLY GROUNDED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE RESPIRATOR FOR ORGANIC VAPORS FOR CONFINED
    AREAS
Ventilation:LOW POINT-MINIMUM OF 6 AIR CHANGES PER HOUR.
Protective Gloves:RUBBER OF PVA
Eye Protection:CHEMICAL SAFETY GOGGLES
Supplemental Safety and Health
ALSO CONTAINS TIO2 AND CARBON BLACK AS INERT FILLER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:151F, THF
Vapor Pres:190
Vapor Density:2.49
Spec Gravity:0.009
Evaporation Rate &amp; Reference:5-8, BUAC=1
Solubility in Water:PRECIPITATE
Appearance and Odor:GRAY, PASTE-LIKE, ETHERAL ODOR
Percent Volatiles by Volume: 80

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
INORGANIC NITRATE AND HALOGENATED HYDROCARBONS
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, AND OPEN
    FLAME
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
    HYRDOGEN CHLORIDE AS GAS
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT, SPARKS, AND
    OPEN FLAME

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE. EXCESSIVE QUANTITIES SHOULD NOT BE
    PERMITTED TO ENTER DRAINS WHERE THERE IS DANGER OF VAPOR BECOMING
    IGNITED. FOLLOW LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.