QUALITY CONTROLLED IND -- Q-8669 POLYMER CONCRETE OVERLAY RESIN  -- 8010-00F004842
<pre>=====================  Product Identification  =====================

Product ID:Q-8669 POLYMER CONCRETE OVERLAY RESIN
MSDS Date:01/01/1987
FSC:8010
NIIN:00F004842
MSDS Number: BBRDJ
=== Responsible Party ===
Company Name:QUALITY CONTROLLED IND/CORAOPOLIS, PA 15108
Emergency Phone Num:(412) 787-5221
CAGE:EO951
=== Contractor Identification ===
Company Name:QUALITY CONTROLLED IND/CORAOPOLIS, PA 15108
CAGE:EO951

=============  Composition/Information on Ingredients  =============

Ingred Name:UNSATURATED POLYESTER
Fraction by Wt: 55%

Ingred Name:STYRENE, MONOMER  (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 45%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:UPPER RESP TRACT
    IRRITATION/UNCONSCIOUSNESS/HEADACHE/NAUSEA/VOMITING/DROWSINESS/VOMI
    TING/WEAKNESS.

=======================  First Aid Measures  =======================

First Aid:SKIN: REMOVE/WASH CONTAMINATED CLOTHING/DECONTAMINATE
    FOOTWEAR BEFORE REUSE. EYES: FLUSH W/WATER FOR AT LEAST 15 MINS.
    INGESTION: DON'T INDUCE VOMITING. GIVE 1-2 OF WATER. NEVER GIVE
    ANYTHING IF UNCON SCIOUS PERSON. INHALATION: REMOVE TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point:74F
Lower Limits:6.1%
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, HALON 1211. WATER MAY
    INEFFECTIVE.
Fire Fighting Procedures:SCBA WITH FULL FACEPIECE & PROTECTIVE
    CLOTHING.
Unusual Fire/Explosion Hazard:HEAVY VAPORS CAN FLOW ALONG SURFACES TO
    DISTANT IGNITION SOURCES/FLASHBACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION/VENTILATE SPILL
    AREA. WEAR SKIN, EYE & RESP PROTECTIONURING CLEANUP. CONTAIN
    SPILL/KEEP OUT OF SEWERS/DRAINS. SOAK UP LIQUID WBSORBENT, & USING
    NONSPARKING EQUIPMENT, SHO VEL INTO WASTE CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PREVENT SKIN/EYE CONTACT. AVOID
    BREATHING VAPORS. CHECK WEEKLY TO DETERMINE INHIBITOR/POLYMER NTENT
    IF STORAGE IS IN EXCESS OF 30 DAYS OF 90F.
Other Precautions:THIS IS USED IN CONJUNCTION WITH PROMOTERS,
    CATALYSTS, ETC., OF OTHER MANUFACTURERS; FOLLOW THEIR SAFETY AND
    HANDLING INSTRUIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF NEEDED, USE MSHA-NIOSH APPROVED RESPIRATOR
    FOR ORGANIC VAPORS.
Ventilation:USE LOCAL EXHAUST TO CONTROL EXPOSURES.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/FACESHIELD
Other Protective Equipment:EYEWASH/SAFETY SHOWER IN WORK AREA. ARM
    COVERS/APRON.
Supplemental Safety and Health
MSDS UPDATED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:295F
Vapor Pres:4.3
Vapor Density:3.6
Spec Gravity:1.01
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER COLORED, AROMATIC LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS, COPPER, AND COPPER ALLOYS
Stability Condition to Avoid:ELEVATED TEMPS, CONTAMINATION W/CATALYST
Hazardous Decomposition Products:CO2, CO, ACRID FUMES, PHENOL
    DERIVATIVES, SMOKE.
Conditions to Avoid Polymerization:STYRENE FIRES PRODUCE COPIOUS
    AMOUNTS OF DENSE SMOKE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COVER CONTAINER/REMOVE FROM WORK AREA. BECAUSE
    OF A FLASH POINT <140F, DISCARDED PRODUCT IS A HAZARDOUS WASTE, NO.
    D001, UNDER RCRA, 40 CFR 261.21. DISPOSE OF IN FACILITY PERMITTED
    FOR HAZARDOUS WASTE .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.