SCM- COATINGS & RESINS DIVISION -- Y 5452, EPOXY CONVERTER  -- 8010-00N001178
<pre>=====================  Product Identification  =====================

Product ID:Y 5452, EPOXY CONVERTER
MSDS Date:01/01/1985
FSC:8010
NIIN:00N001178
MSDS Number: BCHFP
=== Responsible Party ===
Company Name:SCM- COATINGS & RESINS DIVISION
Address:925 EUCLID AVE
City:CLEVELAND
State:OH
ZIP:44115
Country:US
CAGE:GO992
=== Contractor Identification ===
Company Name:GLIDDEN CO MEMBER OF ICI WORLD PAINTS
Address:925 EUCLID AVE
Box:15049
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:216-344-8000
CAGE:72818
Company Name:SCM- COATINGS & RESINS DIVISION
Address:925 EUCLID AVE
Box:City:CLEVELAND
State:OH
ZIP:44115
Country:US
CAGE:GO992

=============  Composition/Information on Ingredients  =============

Ingred Name:N-BUTYL ALCOHOL  (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 1%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ISOBUTYL ALCOHOL  (SARA III)
CAS:78-83-1
RTECS #:NP9625000
Fraction by Wt: 16%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 9%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:2-ETHOXYETHANOL (EGEE)  (SARA III)
CAS:110-80-5
RTECS #:KK8050000
Fraction by Wt: 16%
OSHA PEL:S,200 PPM
ACGIH TLV:S, 5 PPM; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 5%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE,SKIN & RESP TRACT: IRRIT. RPTD/PRLNG SKIN
    CNTCT: POSS DERMATITIS. POSS HDACHE,DIZZ,UNCNSCS/COMA

=======================  First Aid Measures  =======================

First Aid:FUMES:MOVE PERSON TO WELL VENTILATED AREA. RESTORE BREATHING.
    GET MEDICAL ATTN. SKIN CNTCT:WIPE W/CLEAN CLOTH, WASH THOROUGHLY
    W/SOAP & WATER. EYE CNTCT:FLUSH THOROUGHLY W/WATER. GET MEDICAL
    ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:20F (TCC)
Lower Limits:1.2
Extinguishing Media:CO*2,DRY CHEMICAL OR FOAM
Unusual Fire/Explosion Hazard:AVOID HEAT, SPARK & OPEN FLAME. EXTREME
    HEAT/FIRE:CLSD CONTNR MAY EXPLODE. DO NOT APPLY TO HOT SURF

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.VENTILATE
    AREA.MOP SPILLS W/INERT ABSORBENT.BURN SWEEPINGS IN A SAFE AREA
    (MFR RECM)-MUST BE IAW LOCAL,STATE & FEDERAL REGULATIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:MFR RECM STORE BELOW 100F. KEEP
    CONTAINERS CLOSED & AWAY FROM HEAT & OPEN FLAME.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN & BREATHING VAPORS OR
    SPRAY MIST.DO NOT TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OPEN,RESTRICT VENTS & CLOSED AREAS-USE
    NIOSH/MSHA APPRVD EQUIP.
Ventilation:PROVIDE DILUTION VENT OR LOCAL EXHAUST TO KEEP VAP BELOW
    TLV
Protective Gloves:SOLVENT RESIST
Eye Protection:SPLASH PROOF GOGGLES
Supplemental Safety and Health
VAP PRESS:70.0 BASED ON ONE CHEM IN PROD-MEK. SPEC FIRE PROC:USE H*2O
    SPRAY TO COOL CLSD CONTNR EXPOS TO EXTRM HEAT TO PREVENT PRESS
    BUILD-UP.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:172 TO 276F
Vapor Density:>1
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:55.8

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION W/ FOREIGN MATERIALS
Hazardous Decomposition Products:CO & POSSIBLE ACRILD FUMES ON
    IGNITION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT INCINERATE IN CLOSED CONTAINERS.MUST BE
    IAW FLOCAL,STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.