CELLO CORPORATION -- CLEAR CONCRETE SEAL # 47  -- 8030-00N006508
<pre>=====================  Product Identification  =====================

Product ID:CLEAR CONCRETE SEAL # 47
MSDS Date:01/01/1985
FSC:8030
NIIN:00N006508
MSDS Number: BCMXW
=== Responsible Party ===
Company Name:CELLO CORPORATION
Emergency Phone Num:301-939-1234
CAGE:DO840
=== Contractor Identification ===
Company Name:CELLO CORP
Address:1354 OLD POST RD
City:HAVRE DE GRACE
State:MD
ZIP:21078
Country:US
Phone:410-939-1234
CAGE:02176
Company Name:CELLO CORPORATION
Address:1354 OLD POST ROAD
City:HAVRE DE GRACE
State:MD
ZIP:21078
Country:US
Phone:301-879-2770
CAGE:DO840

=============  Composition/Information on Ingredients  =============

Ingred Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 35%
OSHA PEL:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN DRYING: EYE IRRIT. EXCESSIVE INHAL MAY
    CAUSE ANESTHESIA, HEADACHE, NAUSEA, UPPER RESP IRRIT.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF H*2O FOR @ LEAST 15 MIN. CALL
    PHYSICIAN. SKIN:WASH W/MILD SOAP & H*2O, APPLY SKIN CREAM. IF
    SEVERE CALL PHYSICIAN. INHAL:RMV TO FRESH AIR, APPLY ARTIFICIAL
    RESP IF NECESS, CALL  PHYSICIAN. INGEST:CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:109F, SCC
Lower Limits:0.7
Upper Limits:6
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH W/H*2O INTO A RETAINING AREA OF
    CONTAINER. AVOID SPARKS, FIRE/HOT METAL SURFACES. SMALL AMTS MAY BE
    ABSORBED ONTO APPROPIATE ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP COOL & AWAY FROM SOURCE OF
    IGNITION. USE W/ADEQUATE VENTILATION.
Other Precautions:AVOID PROLONGED OR REPEATED PERSONAL CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD CARTRIDGE RESPIRATOR OR GAS
    MASK.
Ventilation:MECHANICAL VENTILATION
Protective Gloves:IMPERMEABLE
Eye Protection:GOGGLES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
PRODUCT DOES NOT CONTAIN ISOCYANATE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:325F
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:0.8559
Evaporation Rate &amp; Reference:4
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER LIQUID W/SOLVENT ODOR
Percent Volatiles by Volume:65

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS/SELECTED AMINES.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, FIRE
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CO*2
    OR CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS/DISPOSE IAW
    FEDERAL, STATE, & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.