INCO ALLOYS INTERNATIONAL,INC. -- MONEL W.E.190  -- 3439-00-230-1706
<pre>=====================  Product Identification  =====================

Product ID:MONEL W.E.190
MSDS Date:01/01/1987
FSC:3439
NIIN:00-230-1706
MSDS Number: BDKWK
=== Responsible Party ===
Company Name:INCO ALLOYS INTERNATIONAL,INC.
Emergency Phone Num:(304)526-5780
CAGE:9Z762
=== Contractor Identification ===
Company Name:INCO ALLOYS INTERNATIONAL INC
Address:1401 BURRIS RD
Box:City:NEWTON
State:NC
ZIP:28658-1754
Country:US
Phone:800-624-3411
CAGE:9Z762

=============  Composition/Information on Ingredients  =============

Ingred Name:NICKEL  (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 45%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 20%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:BARIUM CARBONATE (NUISANCE DUST)
CAS:513-77-9
RTECS #:CQ8600000
Fraction by Wt: <10%
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3; 8990

Ingred Name:CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: <10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9192

Ingred Name:CALCIUM FLUORIDE
CAS:7789-75-5
RTECS #:EW1760000
Fraction by Wt: <10%
OSHA PEL:2.5 MG/M3 (F)
ACGIH TLV:2.5 MG/M3 (F); 8990

=====================  Hazards Identification  =====================

Effects of Overexposure:METALLIC TASTE,NAUSEA,TIGHTNESS OF
    CHEST,FEVER,DIZZINESS EYE,NOSE,THROAT DRYNESS AND IRRITATION.

=======================  First Aid Measures  =======================

First Aid:REMOVE FROM EXPOSURE AND OBTAIN PROMPT MEDICAL ATTENTION.IF
    UNCONSCIOUS,GIVE OXYGEN.IF NOT BREATHING GIVE CPR.EMPLOY FIRST AID
    TECNIQUES RECOMMENDED BY AMERICAN RED CROSS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
    COMBUSTIBLE PRODUCTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
    AND PLACE IN SUITABLE DOT APPROVED DISPOSAL CONTAINER.

======================	Handling and Storage  ======================

Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE
    FUMES.MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES.AVOID ELECTRICAL
    SHOCK BY MAINTAINING DRY WORK AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:FUME RESP.OR AIR SUPPLIED RESP.IN CONFINED
    SPACES.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:WELDERS GLOVES
Eye Protection:FACE SHLD W/FILTER LENS.
Other Protective Equipment:SUBST.DK.CLOTH,ARM
    PROTECTOR,APRON,HAT,SHOULDR.PROTECTION.
Supplemental Safety and Health
MSDS DATED MAY 85/

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:WELDING ROD 1/8 IN DIA X 9 IN LONG

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES OF METALS AND METAL
    OXIDES,CO,NO*2,O*3

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.