SCM-GLIDDEN COATINGS & RESINS DIV. -- 921R2104 EPOXY PRIMER PART A  -- 8010-00-264-8866
<pre>=====================  Product Identification  =====================

Product ID:921R2104 EPOXY PRIMER PART A
MSDS Date:01/01/1985
FSC:8010
NIIN:00-264-8866
MSDS Number: BDQXB
=== Responsible Party ===
Company Name:SCM-GLIDDEN COATINGS & RESINS DIV.
Address:925 EUCLID AVE
City:CLEVELAND
State:OH
ZIP:44115
Country:US
CAGE:DO630
=== Contractor Identification ===
Company Name:GLIDDEN CO MEMBER OF ICI WORLD PAINTS
Address:925 EUCLID AVE
Box:15049
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:216-344-8000
CAGE:72818
Company Name:SCM-GLIDDEN COATINGS & RESINS DIVISION
Address:925 EUCLID AVENUE
City:CLEVELAND
State:OH
ZIP:44115
Phone:(216) 826-5566
CAGE:DO630

=============  Composition/Information on Ingredients  =============

Ingred Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 22%.
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 10.0%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:CHROMIUM ION (CR 6+)
CAS:18540-29-9
RTECS #:GB6262000
Fraction by Wt: 0.65%
OSHA PEL:C, 0.1 MG/M3 (CRO3)
ACGIH TLV:0.05 MG/M3 (CR);8990

Ingred Name:2-METHOXYETHANOL (EGME)  (SARA III)
CAS:109-86-4
RTECS #:KL5775000
Fraction by Wt: 4.0%
OSHA PEL:S, 25 PPM
ACGIH TLV:S, 5 PPM; 9192

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 3%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:IRRIT OF YEYS,SKIN, RESP TRACT. HDACHE,DIZZ,
    UNCONSCIOUSNESS,OR COMA. DERMATITIS ON PROLONG CONTACT.

=======================  First Aid Measures  =======================

First Aid:MOVE TO WELL VENTIL AREA; RESTORE BREATHING; CALL MD. SKIN.
    WIPE W/CLEAN EYE: FLUSH THOROUGHLY W/WATER. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:20 F TCC
Lower Limits:1.0
Extinguishing Media:CO*2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:H*2O MAYBE INEFFECT,BUT USE TO COOL HEAT
    EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF
    IGNITION.CONTNRS MAY EXPLODE W/EXTREME HEAT: DO NOT APPLY TO HOT
    SURFACE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION; VENTILATE
    AREA.; MOP SPILS W/INERT ABSORBENT. BURN SWEEPINGS IN SAFE AREA

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 100F KEEP CONTAINERS
    CLOSED & AWAY FROM SOURCES OF IGNITION.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN & BREATHING VAPORS OR
    SPRAY MIST. DO NOT TAKE INTERNALLY. VAPOR PRESSURE GIVEN IS FOR
    METHYL ETHYL KETONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD DEVICE FOR EXPOSURE OF CONCERN
Ventilation:DILUTION OR LOCAL EXHAUST TO KEEP VAPORS BELOW TLV
Protective Gloves:SOLVENT RESIST
Eye Protection:SPLASH PROOF GOGGLES
Supplemental Safety and Health
ALSO KNOWN AS RGL-33322A PART A OF 2 PART PROD.PART B IS 92102100
    CATALYST. CARE HUMAN CARCINOGENS. CONTAINS METN ISOBUTKETONE
    5%-TLV: 50 PPM.KEY1:J1.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:172 TO 311F
Vapor Pres:70
Vapor Density:>1
Evaporation Rate &amp; Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:55.7

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID CONTAM W/FOREIGN MATERIALS.
Hazardous Decomposition Products:CO & POSSIBLE ACRID FUMES ON IGNITION

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINERS. DISPOSE IN
    ACCORD W/LOCAL,STATE, AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.