ALLIED CORPORATION -- GENESOLV D SOLVENT (FREON 113)  -- 6830-00-584-2957
<pre>=====================  Product Identification  =====================

Product ID:GENESOLV D SOLVENT (FREON 113)
MSDS Date:01/01/1987
FSC:6830
NIIN:00-584-2957
MSDS Number: BFGJZ
=== Responsible Party ===
Company Name:ALLIED CORPORATION
Emergency Phone Num:201-455-4157
CAGE:OLYW2
=== Contractor Identification ===
Company Name:ALLIED CORPORATION, CHEMICAL SECTOR
Box:1139R
City:MORRISTOWN
State:NJ
ZIP:07960
Country:US
Phone:201-455-2000
CAGE:OLYW2
Company Name:ALLIED-SIGNAL INC
Address:Box:2332R
City:MORRISTOWN
State:NJ
ZIP:07962-2332
Country:US
Phone:201-455-4414
CAGE:1L164

=============  Composition/Information on Ingredients  =============

Ingred Name:1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113)  (SARA
    III)
CAS:76-13-1
RTECS #:KJ4000000
Fraction by Wt: 100%
OSHA PEL:1000PPM/1250STEL
ACGIH TLV:1000PPM/1250STEL9192
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

Effects of Overexposure:ASPHYXIATION,DROW,IRRIT
    THROAT,DERM,INCO,EXCITEMENT,ARRHY,MILD EYE & SKIN IRRIT.

=======================  First Aid Measures  =======================

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
    DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
    W/SOAP&WATER. RMV CONTAM CLTHG&SHOES. INGEST:INDUCE VOMIT. RPT
    UNTIL VOMIT IS C LEAR. NOTHG BY MOUTH IF UNCONSC. GET MEDICAL ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:680C
Extinguishing Media:MATL IS NON-FLAMMABLE. USE AGENT SUITABLE FOR
    SURROUND FIRE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA. USE WATER SPRAY TO
    COOL CONTAINERS
Unusual Fire/Explosion Hazard:AVOID CONTACT W/ACTIVE METALS. HEAT
    DECOMPOSITION PRODUCTS ARE HALOGENS, HALOGEN ACIDS, & PHOSGENE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE UNPROTECTED PERSONNEL. ELIMIN ANY
    FLAMES. SHUT OFF LEAK. ABSORB LIQ SPILL W/INERT MATL. SHOVEL INTO
    METAL DRUMS,CLOSE & DISPOSE. DIKE LG AMTS W ABSORBENT & PUMP INTO
    DRUMS FOR RECLAMATION OR  DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A CLEAN, COOL, DRY AND WELL
    VENTILATED AREA OF LOW FIRE RISK. PROTECT CONTAINERS FM PHYSICAL
    DAMAGE AND KEEP CLOSED WHEN NOT IN USE.
Other Precautions:TANKS CANNOT BE EFFECTIVELY FLUSHED OF VAPOR IF SUMP
    CONTAINS LIQUID, "EMPTY" CONTAINER MAY CONTAIN PRODUCT RESIDUES
    (VAPOR OR LIQUID). RMV CLOSURES CAREFULLY TO RELIEVE POSSIBLE
    PRESSURE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED SCBA FOR ENCLOSED AREAS.
Ventilation:LOCAL IF SPILL LIKELY MECHANICAL (GEN) REQD.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SAFETY GOGGLES
Other Protective Equipment:EYE WASH STATIONS. SAFETY SHOWERS,
    IMPERVIOUS APRON IF REQD.
Supplemental Safety and Health
MSDS DATED OCT 1985.  ***POWDERED TITANIUM,CALCIUM,MAGNESIUM,ZINC &
    BERYLLIUM ARE INCOMPATIBLE & MAY REACT VIOLENTLY.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:117F,47.6C
Vapor Pres:284
Vapor Density:6.45
Spec Gravity:1.57
Evaporation Rate &amp; Reference:2 (ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID, FAINT ETHEREAL ODOR
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALUMINUM POWDER,FINELY DIVIDED BARIUM,LITHIUM SHAVINGS ***
Stability Condition to Avoid:TEMPERATURES ABOVE 482F,250C CAUSE
    THERMAL/OXIDATIVE DECOMP.
Hazardous Decomposition Products:HALOGENS,HF,HCL, & CARBONYL HALIDES
    SUCH AS PHOSGENE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE I/A/W ALL LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.