DELTA PLASTICS COMPANY, INC. -- HARDENER FOR EPOXY RESINS  -- 8030-00-939-6896
<pre>=====================  Product Identification  =====================

Product ID:HARDENER FOR EPOXY RESINS
MSDS Date:03/07/1983
FSC:8030
NIIN:00-939-6896
Kit Part:Y
MSDS Number: BHMZK
=== Responsible Party ===
Company Name:DELTA PLASTICS COMPANY, INC.
Address:7449 AVENUE 304
City:VISALIA
State:CA
ZIP:93291
Country:US
Info Phone Num:209-651-2034
Emergency Phone Num:209-651-2034
CAGE:TO171
=== Contractor Identification ===
Company Name:DELTA PLASTICS COMPANY, INC
Address:7449 AVENUE 304
Box:City:VISALIA
State:CA
ZIP:93291
Country:US
Phone:209-651-2034
CAGE:TO171

=============  Composition/Information on Ingredients  =============

Ingred Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: 100%
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:PROLONGED & REPEATED BREATHING OF VAPORS WILL
    BE IRRITATING AND MAY CAUSE ASTHMASKIN & EYE CONTACT CAUSES BURNS.
    THIS MATERIAL IS A SENSITIZER WHICH CAUSES SKINRASH

=======================  First Aid Measures  =======================

First Aid:REMOVE TO FRESH AIR. FLUSH EYE CONTACT AT ONCE FOR 15 MIN.
    AND GET MEDICAL CARE.FLUSH SKIN CONTACT AT ONCE WITH WATER FOLLOWED
    BY A SOAP AND WATER WASH. REMOVE CONTAMINATED CLOTHING AND WASH
    BEFORE WE ARING AGAIN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:215 F 101.67 C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL FOR SMALL FIRES.
    POLYMER FOAMFOR LARGE FIRES
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:DILUTION WITH LARGE VOLUMES OF WATER MAY
    REDUCE INTENSITY OF FLAMES

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH AWAY SPILLED MATERIAL WITH LARGE VOLUMES
    OF WATER

======================	Handling and Storage  ======================

Handling and Storage Precautions:DANGER: LIQUID CAUSES EYE INJURY &
    SKIN BURNS. BREATHING OF VAPOR MAY BE HARMFUL
Other Precautions:DO NOT GET IN EYES, SKIN OR ON CLOTHING. AVOID
    PROLONGED/REPEATED BREATHING OF VAPORS. USE WITH ADEQUATE
    VENTILATION. IN CASE OF CONTACT WITH EYES OR SKIN, IMMED FLUSH WITH
    PLENTY OF WATER FOR AT LEAS T 15 MINUTES; FOR EYES, GET MED ATTN

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:CHEMICAL CARTRIDGE RESPIRATOR
Ventilation:LOCAL EXHAUST PREFERABLE. MECHANICAL EXHAUST USUALLY
    ACCEPTABLE
Protective Gloves:RUBBER GLOVES
Eye Protection:COVERALL GOGGLES
Other Protective Equipment:FACE SHIELD ADVISED. RUBBER APRON, EYE BATH
    AND SAFETY SHOWER
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:404.4 F
Vapor Density:> AIR
Evaporation Rate &amp; Reference:NA
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ACIDS
Conditions to Avoid Polymerization:AVOID ACIDS AND OR LARGE QUANTITIES
    OF EPOXY RESINS

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN A FURNACE OR BURY IN ACCORDANCE
    WITHALL FEDERAL, STATE OR LOCAL REGULATIONS

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.