WATTS REGULATOR COMPANY -- MONEL & HASTELLOY C  -- 4820-00F014276
<pre>=====================  Product Identification  =====================

Product ID:MONEL & HASTELLOY C
MSDS Date:06/01/1986
FSC:4820
NIIN:00F014276
MSDS Number: BJTWN
=== Responsible Party ===
Company Name:WATTS REGULATOR COMPANY
Address:RT. 114 & CHESTNUT ST.
City:NORTH ANDOVER
State:MA
ZIP:01845
Info Phone Num:(617) 688-1811
Emergency Phone Num:(617) 688-1811
CAGE:79227
=== Contractor Identification ===
Company Name:WATTS REGULATOR COMPANY
Address:RTE. 114 & CHESTNUT ST.
Box:City:NORTH ANDOVER
State:MA
ZIP:01845
Phone:(617) 688-1811
CAGE:79227

=============  Composition/Information on Ingredients  =============

Ingred Name:NICKEL  (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 42-67%
Other REC Limits:1 MG/CUM A1
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192

Ingred Name:GRAPHITE, SYNTHETIC
CAS:7440-44-0
RTECS #:FF5250100
Fraction by Wt: 0.15%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

Ingred Name:MANGANESE  (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 0.8%
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

Ingred Name:CHROMIUM  (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 20%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:COBALT  (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 2.5%
Other REC Limits:0.05 PPM
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293

Ingred Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 17%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Ingred Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 5%
OSHA PEL:10 MG/CUM
ACGIH TLV:5 MG/CUM

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0-30%
Other REC Limits:1 MG(CU)/M3 (DUST)
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0.7%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INGESTION: HARMFUL.
    SKIN: ALLERGIC DERMATITIS. INHALATION: ASTHMA, PULMONARY
    EDEMA/FIBROSIS, SILICOSIS, SHORTNESS OF BREATH, WHEEZING, & DRY
    COUGH.
Explanation of Carcinogenicity:SOME FORMS OF THESE METALS CAN CAUSE
    FORMS OF CANCER.
Effects of Overexposure:EYES: IRRITATION. SKIN: ALLERGIC DERMATITIS.
    INGESTION: HARMFUL. INHALATION: ASTHMA, PULMONARY EDEMA/FIBROSIS,
    SILICOSIS, SHORTNESS OF BREATH, WHEEZING, & DRY COUGH.
Medical Cond Aggravated by Exposure:ALLERGIC DERMATITIS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER. INHALATION:
    REMOVE TO FRESH AIR. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-COMBUSTIBLE
Unusual Fire/Explosion Hazard:IN SOLID FORM, MATERIAL ISN'T
    COMBUSTIBLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE & VENTILATE AREA. VACUUM POWDER UP.
    AVOID HEAVY GENERATION OF DUSTS DURING CLEAN UP. AVOID
    CONTAMINATION.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT BETWEEN	MOLTEN METAL &
    WATER, &/OR OIL RESIDUES. STORE AWAY FROM INCOMPATIVLE MATERIALS.
    DON' EAT/SMOKE NEAR COPPER POWDER & DUST.
Other Precautions:THIS MATERIAL IS POTENTIALLY CONTAMINATED W/CUTTING
    OILS & WATER RESIDUES. AVOID EXPOSURE WHEN HANDLING & MELTING.
    AVOID INHALATION OR DUST & FUMES & CONTACT W/SKIN & EYES. MELTING
    MATERIAL MAY CAUSE	BRIGHTNESS. AVOID INGESTION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:DURING MELTING & WHEN HANDLING POWDER, USE A
    NIOSH APPROVED RESPIRATOR TO KEEP <TLV.
Ventilation:PROVIDE MECHANICAL/LOCAL EXHAUST VENTILATION DURING
    BUFFING/GRINDING/MACHINING & WHEN HANDLING POWDER TO KEEP <TLV.
Protective Gloves:IMPERVIOUS WORK
Eye Protection:SAFETY GLASSES W/SIDE & FACE SHIELDS
Other Protective Equipment:IMPERVIOUS APRON & CLOTHING
Work Hygienic Practices:DON'T EAT & SMOKE IN AREAS WHERE COPPER POWDER
    OR DUSTS ARE HANDLED, PROCESSED, OR STORED.
Supplemental Safety and Health
ALLOY MAY INCLUDE ANY OR ALL OF ANY COMBINATION OF THE ELEMENTS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:5252F
Melt/Freeze Pt:M.P/F.P Text:2651F
Spec Gravity:8.9
Appearance and Odor:SOLIDS OR TURNINGS SILVER GRAY IN COLOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CONTACT BETWEEN MOLTEN METAL & WATER, &/OR OIL RESIDUES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT LOCAL, STATE, & FEDERAL AUTHORITIES
    PRIOR TO DISPOSAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.