MINNESOTA MINING AND MFG CO -- SCOTCH BRAND SANDBLAST FILLER NO 2 70-9020-  -- 6850-00N015762
<pre>=====================  Product Identification  =====================

Product ID:SCOTCH BRAND SANDBLAST FILLER NO 2 70-9020-
MSDS Date:03/17/1989
FSC:6850
NIIN:00N015762
MSDS Number: BKQKB
=== Responsible Party ===
Company Name:MINNESOTA MINING AND MFG CO
Address:3M CTR 224-2S-25
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1341/612-733-1110
Emergency Phone Num:612-733-1341
CAGE:76381
=== Contractor Identification ===
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Ingred Name:N-HEPTANE
CAS:142-82-5
RTECS #:MI7700000
Fraction by Wt: <75.0%
OSHA PEL:500 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9293

Ingred Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 5.0-10%
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293

Ingred Name:ROSIN ACID
CAS:8050-09-7
Fraction by Wt: 5.0-10%

Ingred Name:RUBBER, NATURAL (CRUDE RUBBER)
CAS:9006-04-6
RTECS #:VL8020000
Fraction by Wt: 5.0-10%

Ingred Name:ETHYL ALCOHOL (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: <1.0%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192

Ingred Name:HYDROQUINONE, 2,5,-DI-T-PENTYL
    (2,5-DI-TERT-AMYLHYDROUINONE)
CAS:79-74-3
RTECS #:MX6300000
Fraction by Wt: <1.0%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:LIQ MAY CAUSE IRRIT OF SKIN UPON
    PRLNG/RPTD CONTACT. MAY CAUSE RESP SYS IRRIT & TEMP NERV SYS
    IMPAIRMENT. INGEST: DIGEST SYS IRR W/NAUSEA & VOMITING, CHOKING,
    COUGHING, GAGGING, DIFF BRTHG & NERV SYS  IMPAIRMENT.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:OVEREXPOSURE:  DIZZINESS, GIDDINESS, STUPOR,
    WEAKNESS, FATIGUE, NAUSEA, HEADACHE, COMA, ANEMIA, DEATH.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:	FLUSH IMMEDIATELY W/PLENTY OF WATER FOR AT LEAST 15 MIN
    HOLDING EYELIDS OPEN.  CALL MD.  SKIN:  WASH AFFECTED AREA W/SOAP &
    WATER. INHAL: REMOVE PERSON TO UNCONTAMINATED AIR.	IF NOT
    BREATHING,	GIVE ART RESP. CALL MD. SWALLOWED: DO NOT INDUCE
    VOMITING.  IMMEDIATELY CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:35.0F,1.7C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EXTINGUISH ALL INGNITION SOURCES. VENTILATE
    AREA. OBSERVE PRECAUTIONS FROM OTHER SECTIONS.  COLLECT SPILLED
    MATERIAL, PLACE IN US DOT-APPROVED METAL CONTAINER, AND SEAL. 
    CLEAN UP RESIDUE WITH APPROPR IATE SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED. GROUND
    CONTAINERS WHEN TRANSFERRING CONTENTS.
Other Precautions:AVOID ALL SOURCES OF IGNITION.  AVOID EYE CONTACT.
    AVOID REPEATED OR PROLONGED SKIN CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A NIOSH/MSHA ORGANIC VAPOR RESPIRATOR.
Ventilation:USE LOCAL EXHAUST VENTILATION ON OPEN CONTAINERS AND
    TRANSFER POINTS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORK GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:200F,93C
Vapor Density:3.50
Spec Gravity:0.800
pH:N/D
Appearance and Odor:OFF WHITE, PASTE, SOLVENT ODOR
Percent Volatiles by Volume:75

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE WASTE/BULK PRODUCT IN A HAZARDOUS
    WASTE FACILITY.  CONSULT APPLICABLE REGULATIONS OR AUTHORITIES
    BEFORE DISPOSAL. US EPA HAZARDOUS WASTE NUMBER:  DOO1 (IGNITABLE)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.