ACE HARDWARE CORP/PAINT DIV -- 114A141, 7-STAR RUSTIC TONES OIL SOLID (SUP  -- 8010-00N028919
<pre>=====================  Product Identification  =====================

Product ID:114A141, 7-STAR RUSTIC TONES OIL SOLID (SUP
MSDS Date:10/01/1986
FSC:8010
NIIN:00N028919
MSDS Number: BMYML
=== Responsible Party ===
Company Name:ACE HARDWARE CORP/PAINT DIV
Address:21901 SOUTH CENTRAL AVENUE
City:MATTESON
State:IL
ZIP:60443
Country:US
Info Phone Num:312-720-0600
Emergency Phone Num:312-720-0600
CAGE:ACEHA
=== Contractor Identification ===
Company Name:ACE HARDWARE CORPORATION
Address:21901 SOUTH CENTRAL AVENUE
City:MATTESON
State:IL
ZIP:60443
Country:US
Phone:708-720-0600
CAGE:ACEHA

=============  Composition/Information on Ingredients  =============

Ingred Name:HYDROTREATED LIGHT DISTILLATE; (MINERAL SPIRITS). VP: 2.0
CAS:64742-47-8
Fraction by Wt: 37%
OSHA PEL:500 PPM (MFR)
ACGIH TLV:100 PPM (MFR)

Ingred Name:HYDROTREATED LIGHT DISTILLATE; (MINERAL SPIRITS (140
    FLASH)). VP: 0.5
CAS:64742-47-8
Fraction by Wt: 4.0%
OSHA PEL:500 PPM (MFR)
ACGIH TLV:100 PPM (MFR)

Ingred Name:SILICA, CRYSTALLINE - CRISTOBALITE
CAS:14464-46-1
RTECS #:VV7325000
Fraction by Wt: 1.5%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.05 MG/M3 RDUST9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:INHALATION IS ANESTHETIC. IRRITATION
    OF RESPIRATORY TRACT OR NERVOUS SYSTEM DEPRESSION. HEADACHE,
    DIZZINESS, NAUSEA, CONFUSION, UNCONSCIOUSNESS OR COMA. SKIN/EYE
    CONT: PRIMARY IRRIT. SANDING OF FILM C AN GENERATE DUST CONTAINING
    CRYSTALLINESILICA. REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA CRYSTALLINE (CRISTOBALITE): GROUP
    2A (IARC), GROUP 2 (NTP).
Effects of Overexposure:HLTH HAZ: OCCUPATIONAL OVEREXPOSURE TO SOLVENTS
    WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM &
    QUIET, NOTIFY PHYS. EYES: FLUSH IMMED WITH RUNNING WATER FOR AT
    LEAST 15 MIN. SKIN: WASH WITH SOAP AND WATER AND APPLY SKIN CREAM.
    NOTIFY PH YS IN ALL CASES. INGEST: CALL MD .

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:105F,41C
Lower Limits:0.9%
Extinguishing Media:FOAM, "ALCOHOL" FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H2O
    SPRAY MAY BE INEFTIVE. H2O MAY BE USED TO COOL CLSD CONTR TO PVNT
    PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTR TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPARKS, & OPEN FLAME. HEAT MAY CAUSE PRESS
    BUILD-UP IN CLOSED CONTR, H2O MAY BE USED TO COOL.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
    REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DOL STORAGE CATEGORY-2.
Other Precautions:CONTENTS ARE COMBUSTIBLE. KEEP AWAY FROM HEAT/OPEN
    FLAME. USE W/ADEQ VENT. AVOID BRTHG VAP/SPRAY MIST. AVOID CONT
    W/SKIN/EYES. WASH HANDS AFTER USING. KEEP CONTR CLSD WHEN NOT IN
    USE. DO NOT TRANSFER  CONTENTS TO OTHER CONTR FOR (SUPP DATA)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF ENGINEERING AND ADMINISTRATIVE CONTROLS OF
    AIR CONTAMINANTS ARE NOT POSSIBLE, USE NIOSH/MSHA APPROVED
    RESPIRATORY DEVICES FOR PROTECTION AGAINST SPRAY MIST AND VAPORS.
Ventilation:LOCAL EXHAUT PREFERABLE. MECH(GEN) EXHAUST ACCEPTABLE.
    SPECIAL VENTILATION REQUIRED TO KEEP BELOW TLV AND LEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING, DISCARD
    CONTAMINATED SHOES.
Supplemental Safety and Health
MFR TRADE NAME/PART NO: STAIN BUTTERNUT. FIRE FIGHT PROC: AUTO IGNITION
    OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. OTHER PREC: STORAGE. DO
    NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN. CONSULT N FPA
    CODE. USE APPROVED BONDING AND GROUNDING PROCEDURES.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:>308F,>153C
Vapor Density:HVR/AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:61.38

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:HIGH TEMPERATURES, OPEN FLAME.
Hazardous Decomposition Products:BY FIRE: CO2, CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN APPROVED FACILITY. DO NOT
    INCINERATE CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE WITH FEDERAL,
    STATE, AND LOCAL REGULATIONS REGARDING POLLUTION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.