ACE HARDWARE CORP/PAINT DIV -- 232A110,5-STAR CONCRETE & WOOD SEALER CLEAR  -- 8010-00N029001
<pre>=====================  Product Identification  =====================

Product ID:232A110,5-STAR CONCRETE & WOOD SEALER CLEAR
MSDS Date:10/01/1986
FSC:8010
NIIN:00N029001
MSDS Number: BMYPH
=== Responsible Party ===
Company Name:ACE HARDWARE CORP/PAINT DIV
Address:21901 SOUTH CENTRAL AVENUE
City:MATTESON
State:IL
ZIP:60443
Country:US
Info Phone Num:312-720-0600
Emergency Phone Num:312-720-0600
CAGE:ACEHA
=== Contractor Identification ===
Company Name:ACE HARDWARE CORPORATION
Address:21901 SOUTH CENTRAL AVENUE
City:MATTESON
State:IL
ZIP:60443
Country:US
Phone:708-720-0600
CAGE:ACEHA

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; (MINERAL SPIRITS). VP:
    2.0
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 68.5%
OSHA PEL:500 PPM (MFR)
ACGIH TLV:100 PPM (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL IS ANESTHETIC. IRRITATION
    OF RESP TRACT OR NERVOUS SYSTEM DEPRESSION. HEADACHE, DIZZINESS,
    NAUSEA, CONFUSION, UNCONSCIOUSNESS OR COMA. SKIN OR EYE: PRIMARY
    IRRITATION. CHRONIC: REPORTS HA VE ASSOCIATED REPEATED AND
    PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
    BRAIN & NERVOUS SYSTEM DMG.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE FROM EXPOSURE, RESTORE BREATHING, KEEP WARM AND
    QUIET, NOTIFY PHYSICIAN. EYES: FLUSH IMMED WITH RUNNING WATER FOR
    AT LEAST 15 MIN. SKIN: WASH WITH SOAP AND WATER AND APPLY SKIN
    CREAM. NO TIFY PHYSICIAN IN ALL CASES. INGEST: CALL MD IMMEDIATELY
    .

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:105F,41C
Lower Limits:0.9 %
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:DURING EMERGENCY CNDTNS OVEREXP TO DECOMP PROD
    MAY CAUSE HLTH HAZ. SYMP MAY NOT BE IMMED APPARENT. OBTAIN MED
    ATTN. NIOSH/MSHA APPRVD SCBA & FULL (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNR TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPARKS & OPEN FLAME. HEAT MAY CAUSE PRESSURE
    BUILD-UP IN CLOSED CNTNRS, WATER MAY BE USED TO COOL.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
    REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DOL STORAGE CATEGORY 2. CONTENTS ARE
    COMBUSTIBLE, KEEP AWAY FROM HEAT & OPEN FLAME. USE ONLY WITH ADEQ
    VENTILATION. KEEP CNTNR CLSD WHEN NOT IN USE.
Other Precautions:AVOID BRTHG VAPOR & SPRAY MIST. AVOID CONTACT WITH
    SKIN & EYES. DO NOT TRANSFER CONTENTS TO OTHER CNTNRS FOR STORAGE.
    DO NOT TAKE INTERNALLY, KEEP OUT OF REACH OF CHILDREN. CONSULT NFPA
    CODE. USE APPR VD BONDING & GROUNDING PROC.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF ENGINEERING AND ADMINISTRATIVE CONTROLS OF
    AIR CONTAMINANT ARE NOT POSSIBLE, USE RESPIRATORY DEVICES APPROVED
    BY NIOSH/ MSHA FOR PROT AGAINST SPRAY MIST AND VAPORS.
Ventilation:LOCAL EXHAUST PREFERABLE. MECHANICAL (GENERAL) EXHAUST
    ACCEPTABLE. SPECIAL VENT REQUIRED TO KEEP TLV BELOW TLV & LEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USING. REMOVE AND WASH
    CONTAMINATED CLOTHING, DISCARD CONTAMINATED SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC: PROT EQUIP . WATER SPRAY MAY BE INEFFECTIVE. WATER MAY
    BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP AND
    POSSIBLE AUTO IGNITION OR EXPLOSION WHEN EXPOSED TO EXT REME HEAT.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:>308F,>153C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.9 
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:62.11

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:HIGH TEMPERATURES, OPEN FLAME.
Hazardous Decomposition Products:BY FIRE: CO2 AND CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN APPROVED FACILITY. DO NOT
    INCINERATE CLOSED CNTNRS. DISPOSE OF IN ACCORDANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIONS REGARDING POLLUTION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.