INCO ALLOYS INTERNATIONAL INC -- MONEL ALLOY 418  -- 3439-00N034291
<pre>=====================  Product Identification  =====================

Product ID:MONEL ALLOY 418
MSDS Date:12/06/1991
FSC:3439
NIIN:00N034291
MSDS Number: BPWFQ
=== Responsible Party ===
Company Name:INCO ALLOYS INTERNATIONAL INC
Address:3200 RIVERSIDE DRIVE
City:HUNTINGTON
State:WV
ZIP:25720
Country:US
Info Phone Num:304-526-5100
Emergency Phone Num:304-526-5780
CAGE:28553
=== Contractor Identification ===
Company Name:INCO ALLOYS INTERNATIONAL, INC. DIV INTL NICKEL CO
Address:3200 RIVERSIDE DR
City:HUNTINGTON
State:WV
ZIP:25705
Country:US
Phone:304-526-5100
CAGE:28553

=============  Composition/Information on Ingredients  =============

Ingred Name:ING 10:PROBS SUCH AS APATHY, DROW, WEAK, SPASTIC GAIT,
    PARAL & OTHER NEUROLOGICAL PROBS RESEMBLING PARKINSONISM.(ING 12)
RTECS #:9999999ZZ

Ingred Name:ING 11:EXCESS INHAL OF FUMES MAY CAUSE "METAL FUME FEVER".
    ING 3:RPTD INTRATRACHEAL INSTILLATION PRDCD INCR (ING 13)
RTECS #:9999999ZZ

Ingred Name:ING 12:INCIDENCE OF MALIGNANT LUNG TUMORS IN RATS. SINGLE
    INTRATRACHEAL INSTILLATIONS IN HAMSTERS @ DOSE NEAR (ING 14)
RTECS #:9999999ZZ

Ingred Name:ING 13:LD50 HAVE PRDCD INCR INCIDENCE OF FIBROSARCOMAS,
    MESOTHELIOMAS & RHABDOMYOSARCOMAS. INHAL @ CONC 15 TIMES(ING 15)
RTECS #:9999999ZZ

Ingred Name:ING 14:PEL IRRITATED RESP TRACT IN RODENTS. NICKEL IS KNOWN
    SENSIT & MAY PRDCE ALLERGIC RXNS. ING 4:IN DUST FORM(ING 16)
RTECS #:9999999ZZ

Ingred Name:ING 15:IS CONSIDERED NUISANCE DUST W/NO TOX EFTS WHEN EXPOS
    ARE KEPT UNDER CTL. HOWEVER, LIKE ALL DUSTS, HIGH (ING 17)
RTECS #:9999999ZZ

Ingred Name:ING 16:CONCS WILL CAUSE SOME IRRIT TO NOSE/THROAT. INHAL OF
    SIO*2 OVER LONG PERIOD OF TIME CAN CAUSE SILICOSIS. (ING 18)
RTECS #:9999999ZZ

Ingred Name:ING 17:IARC HAS CONCLUDED THERE WAS LTD EVID THAT SIO*2 WAS
    CARCIN TO HUMANS & SUFFICIENT EVID THAT IT WAS (ING 19)
RTECS #:9999999ZZ

Ingred Name:ING 18:CARCIN TO ANIMALS. IARC STATES THAT NUMBER OF
    STUDIES HAVE SHOWN THAT PERS DIAGNOSED AS HAVING SILICOSIS (ING 20)
RTECS #:9999999ZZ

Ingred Name:ING 19:HAVE INCR RISK OF DYING FROM LUNG CANCER. ING
    5:INHAL COULD CAUSE MILD IRRIT TO RESP TRACT. INHAL OF DUST(ING 21)
RTECS #:9999999ZZ

Ingred Name:ING 20:OR FUME COULD PRODUCE LUNG FIBROSIS & CHRONIC
    BRONCHITIS.
RTECS #:9999999ZZ

Ingred Name:OTHER PREC:"THE AMERICAN WELDING SOCIETY", P.O. BOX 351040,
    MIAMI, FL, 33135 OR 29 CFR 1910. "OSHA", U.S. DEPT (ING 22)
RTECS #:9999999ZZ

Ingred Name:ING 21:OF LABOR, WASHINGTON, D.C., 20210 FOR IMPORTANT
    ADDITIONAL INFORMATION.
RTECS #:9999999ZZ

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 27%
OSHA PEL:0.1MG/M3 FUME
ACGIH TLV:0.2MG/M3 FUME
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:MANGANESE  (SARA III). LD50:(ORAL,RAT)9,000 MG/KG.
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 4%
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

Ingred Name:NICKEL  (SARA III). LD50:(ORAL,RAT)>9.000 MG/KG.
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 66%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3

Ingred Name:SILICON. LD50:(ORAL,RAT)3,160 MG/KG.
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 1%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:TITANIUM. PEL & TLV AS TIO*2.
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 2%
OSHA PEL:10 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:SUPDAT:EXPOS TO COPPER. EYES:METAL AS FOREIGN BODY CAN
    PROVOKE INFLAMM RXN RSLTG IN PUS FORM IN CONJ/CORNEA/ (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6:SCLERA. INGEST:MAY CAUSE GI UPSET. WILSON'S DISEASE
    CAN OCCUR IN CERTAIN INDIVS CHARACT BY RETENTION OF (ING 8)
RTECS #:9999999ZZ

Ingred Name:ING 7:EXCESS AMTS OF COPPER IN LIVER, BRAIN, KIDNEYS &
    CORNEAS. THESE DEPOSITS EVENTUALLY LEAD TO TISS NECROSIS &(ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8:FIBROSIS, LIVER DISEASE & NEUROLOGIC CHANGES.
    WILSON'S DISEASE IS PROGRESSIVE & IF UNTREATED, LEADS TO (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9:FATAL LIVER FAILURE. ING 2:EXCESS INHAL/INGEST CAN
    PRDCE POIS. CHRONIC EXPOS CAN LEAD TO NEUROLOGICAL (ING 11)
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENTS 2, 3 & 4.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:AS SHIPPED, THESE COMPLEX ALLOYS HAVE
    NO KNOWN TOX PROPERTIES OTHER THAN CAUSING ALLERGIC RXNS IN INDIV
    SENSIT TO METAL(S) CNTND IN ALLOYS. HOWEVER, USER GEN DUSTS/FUMES
    MAY ON CONT W/SKIN/EYES PRDCE  MECH IRRIT. CHRONIC EXPOS COULD
    CAUSE DERM (SKIN)/CONJ (EYES). EXCESS INHAL OF USER GEN FUMES FROM
    HIGH(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:ANTICIPATED TO BE A CARCINOGEN
    (NTP); GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ:TEMP CUTTING/WELDING OF THESE ALLOYS
    MAY, DEPENDING ON SPEC FEATURES OF PROCESS USED, POSE LONG TERM
    HLTH HAZ. IARC HAS CONCLUDED THAT WELDING FUMES ARE POSS CARCIN TO
    HUMANS. ING 1:METAL DUS T/FUME MAY BE IRRIT TO RESP TRACT.
    INHAL:CAN RSLT IN SYMPS OF "METAL FUME FEVER" SUCH AS CHILLS, FEVER
    & SWEAT. (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH PARTICLES FROM EYEBALLS W/CLEAN H*2O FOR @ LST 15
    MINS. IF IRRIT PERSISTS, SEE MD. SKIN:WASH W/SOAP & H*2O TO REMOVE
    ANY METALLIC PARTICLES. IF RASH DEVELS, SEE MD. INHAL:REMOVE FROM
    EXPOS.  IF SEV RESP IRRIT PERSISTS, SEE MD. INGEST:IF SYMPS ARISE,
    SEE MD.

=====================  Fire Fighting Measures  =====================

Flash Point:NON FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONFLAMMABLE, HOWEVER SPARKS FROM WELDING
    OR GRINDING IN USER OPERATIONS COULD IGNITE FLAMMABLE OR
    COMBUSTIBLE LIQUIDS, VAPORS & SOLIDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VACUUM OR SHOVEL ANY SPILLED MATERIAL INTO A
    SUITABLE CONTAINER. ALLOY WASTES ARE NORMALLY COLLECTED TO RECOVER
    METAL VALUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT EXPOSE SKIN OR EYES TO HEAT &
    RADIATION FROM WELDING OPERATIONS. MAINTAIN EXPOSURE BELOW
    ACCEPTABLE EXPOSURE LEVELS.
Other Precautions:USE INDUS HYGIENE AIR MONITORING TO ENSURE THAT USING
    THIS MATL DOES NOT CREATE EXPOS WHICH EXCEED RECOM EXPOS LIMS.
    ALWAYS USE EXHST VENT IN USER OPERATIONS SUCH AS HIGH TEMP CUTTING,
    WELDING & GRIND ING. REFER TO ANSI Z49.1, (ING 22)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESP PROT IS NEC WHEN EXPOS LIMS FOR AIRBORNE
    CONTAMINANTS ARE EXCEEDED DURING CUTTING, GRINDING OR WELDING ON
    THESE ALLOYS. USE NIOSH/MSHA APPRVD AIR SUPPLIED RESP IN CONFINED
    SPACES. USE ONLY NIOSH/ MSHA APPRVD RESPS I/A/W 29CFR1910.134.
Ventilation:USE LOC EXHST VENT WHEN CUTTING, GRINDING/WELDING. MAINTAIN
    EXPOS BELOW ACCEPT EXPOS LIMS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG/FULL LGTH FCSHLD .
Other Protective Equipment:WEAR FLAME RETARDANT CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
APPEAR/ODOR:INTERMEDIATE FORM; ODORLESS. HAZ DECOMP PROD:FLUX & SPEC
    PROCESS BEING USED. INGS MAY INCL METALS, METAL OXIDES, CHROMATES,
    FLUORIDES, CO, OZONE, NO*X & OTHER GASES SUCH AS PHOSGENE IF CHL
    ORINATED SOLVS ARE PRESENT. EFTS OF OVEREXP:SKIN:FEW INSTANCES OF
    ALLERGIC RASHES HAVE BEEN REPORTED IN WORKERS (ING 6)

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>2552F,>140
Spec Gravity:8-9
Appearance and Odor:SILVER-COLORED METAL SHAPED AS PLATE/BAR/WIRE/
    TUBE/ROD/STRIP/SHEET/SOME(SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES & GASES GEN IN USER WELDING,
    GRINDING & HIGH TEMP CUTTING OPERATIONS WILL DEPEND ON BASE METAL,
    ELECTRODE,(SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:IF DISPOSAL IS NECESSARY, DISPOSE I/A/W FEDERAL,
    STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.