INCO ALLOYS INTERNATIONAL INC -- 60N MONEL FILLER  -- 3439-00-088-7791
<pre>=====================  Product Identification  =====================

Product ID:60N MONEL FILLER
MSDS Date:04/01/1994
FSC:3439
NIIN:00-088-7791
MSDS Number: BPYBX
=== Responsible Party ===
Company Name:INCO ALLOYS INTERNATIONAL INC
Address:1401 BURRIS RD
City:NEWTON
State:NC
ZIP:28658-1754
Country:US
Info Phone Num:704-465-0356
Emergency Phone Num:704-465-0356
CAGE:9Z762
=== Contractor Identification ===
Company Name:INCO ALLOYS INTERNATIONAL INC
Address:1401 BURRIS RD
Box:City:NEWTON
State:NC
ZIP:28658-1754
Country:US
Phone:800-624-3411
CAGE:9Z762
Company Name:INCO ALLOYS INTERNATIONAL, INC. DIV INTL NICKEL CO
Address:3200 RIVERSIDE DR
City:HUNTINGTON
State:WV
ZIP:25705
Country:US
Phone:304-526-5100
CAGE:28553

=============  Composition/Information on Ingredients  =============

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 27%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:MANGANESE  (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 4%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

Ingred Name:NICKEL  (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 65%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9293

Ingred Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 1%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Ingred Name:SILICONE
CAS:63148-52-7
Fraction by Wt: 1%
Other REC Limits:NONE RECOMMENDED

Ingred Name:TITANIUM, METAL
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 2%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:PEL/TLV: 5 MG/M3.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:AS SHIPPED PRODUCT HAS NO KNOWN
    HAZARDS. USER GENERATED DUSTS AND FUMES MAY ON CONTACT WITH SKIN OR
    EYES PRODUCE MECHANICAL IRRITATION. CHRONIC EXPOSURE COULD CAUSE
    DERMATITIS (SKIN) OR CONJUNCTIVITIS  (EYE). EXCESSIVE INHALATION
    COULD POSEA LONG TERM HEALTH HAZARD.
Explanation of Carcinogenicity:PER MFR, IARC STATES WELDING FUMES ARE
    POSSIBLY CARCINOGENIC TO HUMANS, NICKEL ALSO POSSIBLY CARCINOGENIC
    PER IARC & NTP
Effects of Overexposure:NONE SPECIFIED FOR THE MATERIAL AS SHIPPED.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN CONDITIONS AND
    RESPIRATORY CONDITIONS MAY BE AGGRAVATED BY EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH PARTICLES WITH CLEAN WATER FOR 15 MINUTES. IF
    IRRITATION PERSISTS, SEEK MEDICAL HELP. SKIN: WASH WITH SOAP AND
    WATER. IF RASH DEVELOPS, SEEK MEDICAL ATTENTION. INHALATION: REMOVE
    FROM EXPO SURE. IF SEVERE RESPIRATORY IRRITATION PERSISTS, SEEK
    MEDICAL HELP. INGESTION: IF SYMPTOMS OF INGESTION ARISE, SEEK
    MEDICAL HELP.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:NONFLAMMABLE.
Fire Fighting Procedures:NONFLAMMABLE.
Unusual Fire/Explosion Hazard:SPARKS FROM WELDING IN USER OPERATIONS
    COULD IGNITE FLAMMABLE OR COMBUSTIBLE LIQUIDS, VAPORS AND SOLIDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VACUUM OR SHOVEL ANY SPILLED MATERIAL INTO A
    SUITABLE CONTAINER. ALLOY WASTES ARE NORMALLY COLLECTED TO RECOVER
    METAL VALUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRODUCT NOT HAZARDOUS AS
    SHIPPED/STORED. HAZARD OCCURS WHEN USED IN WELDING PROCESS.
Other Precautions:INHALATION CAN PRODUCE AN ACUTE REACTION KNOWN AS
    METAL FUME FEVER. SYMPTOMS WILL APPEAR WITHIN A FEW HOURS OF
    EXPOSURE; HOWEVER, LONG TERM EFFECTS HAVE NOT BEEN NOTED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NECESSARY WHEN EXPOSURE LIMITS FOR AIRBORNE
    CONTAMINANTS ARE EXCEEDED DURING WELDING WITH THESE ELECTRODES. USE
    AIR SUPPLIED RESPIRATOR IN CONFINED SPACES. USE ONLY NIOSH APPROVED
    RESPIRATORS IN ACCOR DANCE WITH 29 CFR 1910.134.
Ventilation:USE LOCAL EXHAUST WHEN WELDING. MAINTAIN EXPOSURES BELOW
    ACCEPTABLE LIMITS. CONFINED SPACES REQUIRE SPECIAL VENTILATION.
Protective Gloves:WELDER'S GLOVES
Eye Protection:FACE PROTECTION WITH WELDERS' LENS SHADE
Other Protective Equipment:FLAME RETARDANT CLOTHING
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
    AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
THE INGREDIENTS OF FUMES AND GASES GENERATED IN USER WELDING OPERATIONS
    WILL DEPEND ON THE FILLER METAL ALLOY, BASE METAL, FLUX AND THE
    SPECIFIC PROCESS BEING USED.

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>2552F,>140
Spec Gravity:8-9
Appearance and Odor:METALLIC SILVER COLORED WIRE, ODORLESS. SOLID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE
    AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.