J M TULL METALS CO INC -- NICKEL ALLOY, MONEL-INCONEL SHEET  -- 9510-00N036824
<pre>=====================  Product Identification  =====================

Product ID:NICKEL ALLOY, MONEL-INCONEL SHEET
MSDS Date:11/25/1985
FSC:9510
NIIN:00N036824
MSDS Number: BQRKP
=== Responsible Party ===
Company Name:J M TULL METALS CO INC
Address:4400 PEACHTREE INDUSTRIAL BLVD
Box:4725
City:NORCROSS
State:GA
ZIP:30091
Country:US
Info Phone Num:404-449-1611
Emergency Phone Num:404-449-1611
CAGE:0B5P5
=== Contractor Identification ===
Company Name:J M TULL METALS CO INC
Address:4400 PEACHTREE INDUSTRIAL BLVD
Box:City:NORCROSS
State:GA
ZIP:30091
Country:US
Phone:404-449-1611
CAGE:0B5P5

=============  Composition/Information on Ingredients  =============

Ingred Name:COLUMBIUM
Fraction by Wt: 0-10%

Ingred Name:TUNGSTEN
CAS:7440-33-7
RTECS #:YO7175000
Fraction by Wt: 0-5%
OSHA PEL:5 MG/M3;10 STEL
ACGIH TLV:5 MG/M3;10 STEL

Ingred Name:COBALT  (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 0-5%
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293

Ingred Name:TITANIUM OXIDE, (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:MANGANESE  (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 0-2.5%
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

Ingred Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0-5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:EXPLAN OF CARCIN: MONOGRAPHS VOL 49, P. 257, 1990. COBALT:
    GROUP 2B (IARC), IARC MONOGRAPHS VOL 52, P. 363, 1991.
RTECS #:9999999ZZ

Ingred Name:BASE METAL CONSISTING OF INGREDIENT 2.
RTECS #:9999999ZZ

Ingred Name:NICKEL  (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 50-99%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3

Ingred Name:ALLOYING ELEMENTS CONSISTING OF INGREDIENTS 4-13.
RTECS #:9999999ZZ

Ingred Name:IRON (III) OXIDE
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 0-50%
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0-50%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME/1 DUST
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:CHROMIUM  (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 0-50%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 0-30%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:NOTE:STEEL PRODS IN NATURAL STATE DO
    NOT PRESENT AN INHALATION, INJECTION, OR CONTACT HAZARD. HOWEVER,
    OPERATIONS SUCH AS BURNING, WELDING, SAWING, BRAZING, OR GRINDING
    MAY RESULT IN THE FOLLOWING EFF ECTS IF EXPOSURES EXCEED
    PERMISSIBLE LIMITS:ACUTE:EXCESSIVE INHAL OF FUMES FROM MANY METALS
    CAN PRDCE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:ANTIC TO BE A CARC (NTP),NTP
    SIXTH ANNUAL REPORT ON CARCINOGENS, 1991 SUMMARY. GROUP 2B (IARC),
    IARC (ING 14)
Effects of Overexposure:HLTH HAZ:AN ACUTE REACTION KNOWN AS "METAL FUME
    FEVER". SYMPS CONSIST OF CHILLS & FEVER (VERY SIMILAR TO FLU TYPE
    SYMPS) WHICH COME ON IN FEW HRS AFTER HIGH LEVELS OF EXPOS.
    CHRONIC:EXCESS & RPTD OVER EXPOS OF NICKEL & CHROMIUM CAN CAUSE
    VARIOUS FORMS OF DERM, INFLAMM &/OR ULCERATION OF UPPER (SUPP DATA)
Medical Cond Aggravated by Exposure:CHRONIC DISEASES OR DISORDERS OF
    THE RESPIRATORY SYSTEM.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
    MINUTES . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
    O*2/ARTIFICIAL RESPIRATION . SKIN:FLUSH WITH COPIOUS AMOUNTS OF
    WATER  . INGEST:CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
    FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:STEEL PRODUCTS IN THE SOLID STATE PRESENT
    NO FIRE OR EXPOSION HAZARDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:IN WELDING, PRECAUTIONS SHOULD BE
    TAKEN FOR AIRBORNE	CONTAMINANTS WHICH MAY ORIGINATE FROM
    COMPONENTS OF THE WELDING ROD.
Other Precautions:ARC OR SPARK GENERATED WHEN WELDING OR BURNING COULD
    BE A SOURCE OF IGNITION FOR COMBUST & FLAMM MATERIALS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED DUST AND FUME RESPIRATOR
    SHOULD BE USED TO AVOID EXECESSIVE INHALATION OF PARTICULATES WHEN
    EXPOSURE EXCEEDS TLV'S.
Ventilation:ADEQ VENT SHOULD BE UTILIZED WHEN WELDING, BURNING, SAWING,
    BRAZING, GRINDING/MACHINING WHEN EXPOS EXCEEDS TLV'S.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SHOULD BE UTILIZED AS REQUIRED BY THE
    WELDING STANDARDS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MP:>2600F, >1427C. EFTS OF OVEREXP:RESP TRACT. BOTH CHROMIUM & NICKEL
    HAVE BEEN ASSOC W/UPPER RESP CANCER. EXCESS & RPTD OVEREXPOS OF
    IRON FUMES CAN CAUSE SIDEROSIS. EXCESS & PRLNGD INHAL OF MANGANESE 
    FUMES CAN CAUSE BRONCHITIS, PNEUMONITIS, LACK OF COORDINATION.

==================  Physical/Chemical Properties  ==================

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Spec Gravity:8 (H*2O=1)
Appearance and Odor:GRAY-BLACK, ODORLESS SOLID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO PRODUCE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC DUST OR FUMES MAY BE PRODUCED
    DURING WELDING, BURNING, GRINDING, AND POSSIBLE MACHINING.

====================  Disposal Considerations  ====================

Waste Disposal Methods:USED OR UNUSED PRODUCT SHOULD BE TESTED TO
    DETERMINE HAZARD STATUS AND DISPOSAL REQUIREMENTS UNDER FEDERAL,
    STATE, AND LOCAL LAWS AND REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.