AMERICAN TECHNICAL COATING -- TT0091 INTERIOR CONCRETE FLOOR PAINT  -- 8010-00-597-8219
<pre>=====================  Product Identification  =====================

Product ID:TT0091 INTERIOR CONCRETE FLOOR PAINT
MSDS Date:07/21/1993
FSC:8010
NIIN:00-597-8219
MSDS Number: BSRYL
=== Responsible Party ===
Company Name:AMERICAN TECHNICAL COATING
Address:400 WEST CENTRAL BLVD
City:CAPE CANAVERAL
State:FL
ZIP:32920
Country:US
Info Phone Num:800-868-0198
Emergency Phone Num:800-424-9300 CHEMTREC/ 800-332-3136
Preparer's Name:LADY KAIVANEY
CAGE:0LB61
=== Contractor Identification ===
Company Name:AMERICAN TECHNICAL COATINGS CORP
Address:192 CENTER ST
Box:City:CAPE CANAVERAL
State:FL
ZIP:32920
Country:US
Phone:407-783-8474
CAGE:0LB61

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS
CAS:64742-47-8
Fraction by Wt: 25-35%
Other REC Limits:NONE SPECIFIED

Ingred Name:VM&P NAPHTHA
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 25-35%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EFFECTS OF ACUTE EXPOSURE: INHALATION
    MAY IRRITATE THE RESPIRATORY TRACT. INHALATION MAY CAUSE WEAKNESS,
    DIZZINESS, HEADACHE, NAUSEA.				       
	      EFFECTS OF CHRONI C EXPOSURE: PROLONGED OR REPEATED SKIN
    CONTACT MAY CAUSE DERMATITIS. MAY CAUSE ASTHMA-LIKE SPASM &
    BREATHING DIFFICULTY.
Effects of Overexposure:SKIN: MAY IRRITATE. EYE: MAY IRRITATE.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMEDIATELY WITH FLOWING WATER FOR AT LEAST 15
    MINUTES. SKIN: CONSULT A PHYSICIAN IF IRRITATION DEVELOPS. FLUSH
    IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES AND CONSULT
    A PHYSICI AN IMMEDIATELY. INGESTION: CONSULT A DOCTOR IMMEDIATELY.
    INHALATION: REMOVE TO FRESH AIR. ASSIST BREATHING IF NECESSARY.
    CONSULT A PHYSICIAN IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:44.6F,7.0C
Lower Limits:1
Upper Limits:6
Extinguishing Media:WATER FOG, CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA IN CONFINED AREAS OR WHEN EXPOSED TO
    COMBUSTION PRODUCTS. USE WATER SPRAY TO COOL FIRE EXPOSED
    CONTAINERS. COVER WITH SAND OR EARTH.
Unusual Fire/Explosion Hazard:THIS MATERIAL MAY EXPLODE IF EXPOSED TO
    STATIC DISCHARGE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE LRG SPILL & PUMP AWAY.COVER W/ABSORBNT
    MAT'L.REMOVE IGNIT SOURCE.PREVENT DISCHARGE INTO
    SEWERS/WATERWAY.KEEP PEOPLE AWAY.FORM LRG SFTY ZONE.NOTIFY
    AUTHORITIES IMMED.WEAR FULL PROTECT GEAR.AVOID E YE/SKIN CONTACT &
    VAPOR INHAL.SWEEP UP/AVOID DUST.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION. GROUND
    CONTAINERS AND EQUIPMENT TO PREVENT ELECTROSTATIC CHARGES. USE
    SPARK-PROOF TOOLS & EXPLOSION PROOF ELECTRICALS.
Other Precautions:STORE AWAY FROM IGNITION SOURCES. PROTECT FROM
    HUMIDITY. STORE IN TIGHTLY CLOSED CONTAINERS. AVOID CONTACT WITH
    EYES, SKIN, CLOTHING. AVOID BREATHING VAPORS. FLUSH PARTIALLY
    FILLED CONTAINERS WITH DRY	NITROGEN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:APPROVED RESPIRATOR IF TLV IS EXCEEDED.
Ventilation:GENERAL MECHANICAL IS ADEQUATE.
Protective Gloves:WEAR NITRILE RUBBER GLOVES
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:236 TO 597C
Vapor Pres:9.75 @ 25C
Spec Gravity:1.078 @ 25C
Viscosity:75 KU @ 25C
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY VISCOUS LIQUID, PETROLEUM ODOR
Percent Volatiles by Volume:53(WT)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, ALKALIS
Stability Condition to Avoid:HEAT, PEROXIDES, STRONG OXIDIZING AGENTS,
    STRONG ALKALIS
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE
Conditions to Avoid Polymerization:HEAT, PEROXIDES, STRONG OXIDIZING
    AGENTS, STRONG ALKALIS

====================  Disposal Considerations  ====================

Waste Disposal Methods:OBSERVE LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.