REVERE PRODUCTS -- CONCRETE PRIMER  -- 8010-00N066857
<pre>=====================  Product Identification  =====================

Product ID:CONCRETE PRIMER
MSDS Date:05/18/1994
FSC:8010
NIIN:00N066857
MSDS Number: CBWHY
=== Responsible Party ===
Company Name:REVERE PRODUCTS
Address:4529 INDUSTRIAL PKWY
City:CLEVELAND
State:OH
ZIP:44135
Country:US
Info Phone Num:800-321-1976
Emergency Phone Num:800-535-5053
Preparer's Name:GSS
CAGE:31662
=== Contractor Identification ===
Company Name:REVERE PRODUCTS CO
Address:4529 INDUSTRIAL PKY
Box:35311
City:CLEVELAND
State:OH
ZIP:44135-0311
Country:US
Phone:800-321-1976
CAGE:31622
Company Name:REVERE PRODUCTS CO
Address:4529 INDUSTRIAL PKWY
Box:39188
City:CLEVELAND
State:OH
ZIP:44135-0311
Country:US
Phone:800-321-1976/800-535-5053
CAGE:31662

=============  Composition/Information on Ingredients  =============

Ingred Name:SILANE, 3-(2,3-EPOXYPROPOXY)PROPYLTRIMETHOXY-;
    (GLYCIDOXYPROPYLTRIMETHOXY SILANE)
CAS:2530-83-8
RTECS #:VV4025000
Fraction by Wt: 5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:METHANOL (SARA 313) (CERCLA)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: <1%
OSHA PEL:200 PPM, S
ACGIH TLV:200 PPM; 250 STEL, S
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:XYLENE (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 95%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM; 150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES MAY BE IRRITATED BY LIQUID
    CONTACT AND VAPORS. PROLONGED OR REPEATED SKIN CONTACT CAN LEAD TO
    DEFATTING OF SKIN AND IRRITATION. INHALATION OF VAPORS CAN CAUSE
    IRRITATION, NAUSEA, DROWSINESS, INTO XICATION AND NERVOUS SYSTEM
    DEPRESSION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:MAY AGGRAVATE PREEXISTING
    RESPIRATORY CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT
    LEAST 15 MINUTES. SEE MD. INHALATION: REMOVE PERSON TO FRESH AIR.
    ADMINISTER OXYGEN OR ARTIFICIAL RESPIRATION IF NEEDED. INGESTION:
    DO NOT  INDUCE VOMITING. CALL MD OR POISON CONTROL CENTER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:81.0F,27.2C
Extinguishing Media:WATER, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. PROVIDE
    VENTILATION OR NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING
    APPARATUS. CONTROL SOURCE OF SPILL. CAPTURE FREE LIQUID AND PLACE
    INTO A SECURE CONTAINER. USE ABSOR BENT TO CAPTURE RESIDUE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CLOSE CONTAINER WHEN NOT IN USE. STORE
    AWAY FROM SOURCES OF HEAT, SPARKS AND OPEN FLAME.
Other Precautions:NONE KNOWN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH SOLVENT
    CARTRIDGE OR SELF-CONTAINED BREATHING APPARATUS.
Ventilation:LOCAL EXHAUST AND MECHANICAL VENTILATION.
Protective Gloves:SOLVENT IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . AS
    REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USING AND BEFORE
    EATING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:280F,138C
Vapor Pres:10
Vapor Density:HVR/AIR
Spec Gravity:0.88
Evaporation Rate &amp; Reference:0.86 (BUAC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, THIN LIQUID WITH AN AROMATIC SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:IGNITION SOURCES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE LOCAL,
    STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.