SYSTEM THREE RESINS INC -- SYSTEM 21 EPOXY RESIN PART 1  -- 8040-00N081660
<pre>=====================  Product Identification  =====================

Product ID:SYSTEM 21 EPOXY RESIN PART 1
MSDS Date:08/19/1994
FSC:8040
NIIN:00N081660
MSDS Number: CFSTY
=== Responsible Party ===
Company Name:SYSTEM THREE RESINS INC
City:SEATTLE
State:WA
ZIP:98107
Country:US
Info Phone Num:208-782-7976
Emergency Phone Num:206-782-7976;800-424-9300(CHEMTREC)
CAGE:OO286
=== Contractor Identification ===
Company Name:SYSTEM THREE RESINS
Address:1155 N W 48TH STREET
Box:70436
City:SEATTLE
State:WA
ZIP:98107
Country:US
Phone:206-782-7976
CAGE:OO286
Company Name:SYSTEMS THREE RESINS INC
Address:1155 NW 46TH STREET
Box:70436
City:SEATTLE
State:WA
ZIP:98107
Country:US
Phone:206-782-7976
CAGE:0N8J4

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPANE, 1-CHLORO-2,3-EPOXY-; (EPICHLOROHYDRIN (ECH)) (SARA
    302/313) (CERCLA)  % WT: <10 PPM
CAS:106-89-8
RTECS #:TX4900000
Fraction by Wt: <0.1%
OSHA PEL:5 PPM, S
ACGIH TLV:2 PPM, S
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:PHENOL, 4,4'-ISOPROPYLIDENEDI-; (BISPHENOL A) (SARA 313)  %
    WT: <100 PPM
CAS:80-05-7
RTECS #:SL6300000
Fraction by Wt: <0.1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (DIGLYCIDOL ETHER OF
    BISPHENOL A (DGEBPA))
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: 80%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ALKYL GLYCIDYL ETHER; (ALKYLGLYCIDOL ETHER)
CAS:68081-84-5
Fraction by Wt: 20%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:VOLATILE ORGANIC COMPOUND, MATERIAL: NONE
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SUPDAT: GIVE NO MORE THAN 2 GLASSES OF WATER & INDUCE
    VOMITING BY GIVING 2 TABLESPOONS SYRUP OF IPECAC (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6: (1 TABLESPOON & 1 GLASS OF WATER FOR CHILD). IF
    IPECAC IS UNAVAILABLE, GIVE 2 GLASSES OF WATER & INDUCE (ING 8)
RTECS #:9999999ZZ

Ingred Name:ING 7: VOMITING BY TOUCHING FINGER TO BACK OF THROAT. KEEP
    HEAD BELOW HIPS WHILE VOMITING. GET MEDICAL ATTENTION.
RTECS #:9999999ZZ

Ingred Name:SPILL PROC: CLAY, DIATOMACEOUS EARTH OR OTHER ABSORBENT &
    SHOVELED INTO DISPOSAL CONTAINERS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SLIGHTLY IRRITATING TO SKIN,
    MODERATELY IRRITATING TO EYES. ODOR MAY IRRITATE NOSE, THROAT AND
    RESPIRATORY TRACT OF SOME PERSONS. ORAL INGESTION OF ECH MAY CAUSE
    CNS DEPRESSION. CHRONIC: MAY CA USE SKIN SENSITIZATION FROM
    PROLONGED AND REPEATED CONTACT. LAB ANIMAL STUDIES INDICATE THAT
    ECH IS A (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CARCINOGEN. ECH IS PRESENT IN TRACE
    AMOUNTS BUT IT IS UNLIKELY THAT NORMAL WORKING PRACTICES WILL
    PRODUCE ECH CONCENTRATIONS APPROACHING THE OSHA LIMITS.
Medical Cond Aggravated by Exposure:OTHER THAN SKIN SENSITIZATION WHICH
    APPEARS TO BE PERMANENT, EPOXY RESIN DOES NOT APPEAR TO CAUSE LONG
    TERM HEALTH EFFECTS NOR DOES IT APPEAR TO AGGRAVATE OTHER MEDICAL
    CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:SKIN: REMOVE CONTAMD CLTHG & SHOES & WIPE EXCESS OFF SKIN.
    FLUSH SKIN W/WATER. FOLLOW BY WASHING IN SOAP & WATER. IF IRRIT
    OCCURS, SEEK MED ATTN. DO NOT REUSE CLTHG UNTIL CLEANED. CONTAMD
    LEATHER ARTI CLES (SHOES) CANNOT BE DECONTAMD & SHOULD BE
    DESTROYED. EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
    SEEK IMMED MED ATTN. INHAL: REMOVE VICTIM TO FRESH AIR & PROVIDE
    OXYGEN IF (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>350F,>177C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
    WATER SPRAY MAY BE USED TO COOL FIRE EXPOSED CNTNRS. TOXIC FUMES
    MAY BE EVOLVED WHEN THIS SUBSTANCE IS BURNED.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENT AREA. AVOID CONTACT W/MATL. PERSONS NOT
    WEARING APPROP PROT EQUIP SHOULD LEAVE SPILL AREA UNTIL CLEANUP IS
    COMPLETE. STOP SPILL AT SOURCE, DIKE AREA TO PVNT SPREADING, PUMP
    LIQ TO SALVAGE TANK/DR UM. REMAINING LIQ MAY BE TAKEN UP ON (ING 9)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:ALWAYS WEAR EYE PROTECTION WHEN
    SANDING CURED EPOXY RESINS TO AVOID DUST IN EYES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NONE IS REQD WHEN ADEQ VENT IS
    PROVIDED. IN THE ABSENCE OF PROPER ENVIRONMENTAL CONTROL NIOSH
    APPRVD RESPIRATOR IS REQD. FOR EMERGENCIES, A NIOSH APPROVED SELF
    CONTAINED BREATHING APPARATUS O R FULL-FACED RESPIRATOR IS
    RECOMMENDED.
Ventilation:PROVIDE ADEQUATE VENTILATION IN WORK AREAS. CONFINED
    MATERIAL IN SEALED CONTAINERS WHEN NOT IN USE.
Protective Gloves:IMPERVIOUS GLOVES, NEOPRENE/VINYL/RUB.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
    WEAR CLEAN, BODY-COVERING CLOTHING TO AVOID SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
CNDTNS TO AVOID: UNDER UNCONTROLLED CNDTNS OR IN LARGE MASS AS THE
    ENSUING EXOTHERM MAY RESULT IN HEAT & SMOKE RESULTING IN HAZ DECOMP
    PRODS. FIRST AID PROC: BREATHING IS DIFFICULT. GIVE ARTF RESP IF 
    NOT BREATHING. GET MED ATTN. INGEST: DONOT GIVE LIQUIDS IF VICTIM
    IS UNCONSCIOUS OR VERY DROWSY. OTHERWISE, (ING 6)

==================  Physical/Chemical Properties  ==================

Vapor Density:HVR/AIR
Spec Gravity:1.10
Evaporation Rate &amp; Reference:NONVOLATILE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STRAW COLORED, OILY SYRUP-LIKE LIQUID WITH VERY
    SLIGHT SOAPY ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, LEWIS AND MINERAL ACIDS.
Stability Condition to Avoid:EPOXY RESINS & EPOXY RESIN HARDENERS REACT
    W/EACH OTHER PRODUCING HEAT. THEY SHOULD NOT BE MIXED W/EACH OTHER
    (SUPDAT)
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES, ACIDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE IS NOT HAZARDOUS BY RCRA CRITERIA (40 CFR
    261). PLACE IN AN APPROPRIATE DISPOSAL FACILITY IN COMPLIANCE WITH
    LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.