QUIKRETE COMPANIES -- GRAY CONCRETE CRACK SEAL, 8640  -- 5610-00N082431
<pre>=====================  Product Identification  =====================

Product ID:GRAY CONCRETE CRACK SEAL, 8640
MSDS Date:07/15/1996
FSC:5610
NIIN:00N082431
MSDS Number: CGCXC
=== Responsible Party ===
Company Name:QUIKRETE COMPANIES
Address:2987 CLAIRMONT RD SUITE 500
City:ATLANTA
State:GA
ZIP:30329
Country:US
Info Phone Num:770-216-9580
Emergency Phone Num:770-216-9580
CAGE:IO174
=== Contractor Identification ===
Company Name:QUIKRETE COMPANIES
Address:1790 CENTURY CIRCLE
Box:City:ATLANTA
State:GA
ZIP:30345
Country:US
Phone:404-634-9100
CAGE:IO174

=============  Composition/Information on Ingredients  =============

Ingred Name:ACRYLIC POLYMER
CAS:25068-63-7
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:1,2-PROPANEDIOL; (PROPYLENE GLYCOL)
CAS:57-55-6
RTECS #:TY2000000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CALCIUM CARBONATE; (LIMESTONE/MARBLE)
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER
    W/2,2,4-TRIMETHYL-1,3-PENTANEDIOL;
    (2,2,4-TRIMETHYL-1,3-PENTANEDIOL- MONO ISOBUTYRATE)
CAS:25265-77-4
RTECS #:UF6000000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:IRON (III) OXIDE; (IRON OXIDE PIGMENTS)
CAS:1309-37-1
RTECS #:NO7400000
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3 FUME (FE)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF VAPOR OR MIST CAN CAUSE
    FOLLOWING: HEADACHE, NAUSEA, IRRITATION OF NOSE, THROAT AND LUNGS.
    EYE CONTACT:DIRECT CONTACT WITH MATERIAL CAN CAUSE IRRITATION AND
    POSSIBLE CORNEAL INJURY. SKIN  CONTACT:PROLONGED OR REPEATED
    CONTACT CAN CAUSE SLIGHT IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:THORO WASH AFFECTED AREA W/SOAP & WATER. REMOVE CONTAM
    CLTHG. EYES:FLUSH W/LG AMTS OF WATER FOR AT LST 15 MINS, LIFTING
    UPPER & LOWER LIDS OCCAS. GET MED ATTN. INGEST:GIVE 2 GLASSES OF
    WATER. IF  LG AMTS ARE INGESTED, INDUCE VOMIT W/IPECAC SYRUP/BY
    PLACING FINGER AT BACK OF THROAT. NEVER GIVE ANYTHING BY MOUTH TO
    UNCON PERS. GET MED ATTN. INHAL:REMOVE TO FRESH AIR IF EFTS OCCUR.
    CONSULT MD.

=====================  Fire Fighting Measures  =====================

Flash Point:248F,120C
Extinguishing Media:USE METHODS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS WATER BASED DISPERSION CAN SPLATTER
    AT TEMPS >100C(212F). POLYMER FILM CAN BURN ONCE WATER HAS EVAP.
    PROD ALSO MAY CNTN <1% OF SOLV W/FL PT OF 120C(248F).

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY;
    USE CARE TO AVOID FALLING. CNTN SPILLS IMMED W/INERT MATLS (E.G.
    SAND, EARTH). TRANSFER LIQS & SOLID DIKING MATLS TO SEPARATE
    SUITABLE CNTNRS FOR RECOVERY/ DISP. CAUT:KEEP SPILLS & CLEANING
    RUNOFF OUT OF MUNICIPAL SEWERS & OPEN BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID SKIN & EYE CONTACT & AVOID
    BREATHING VAPORS. KEEP FROM FREEZING; MATERIAL MAY COAGULATE.
Other Precautions:MINIMUN RECOMMENDED STORAGE TEMPERATURE FOR THIS
    MATERIAL IS 1C (34F). MAXIMUM RECOMMENDED STORAGE TEMPERATURE FOR
    THIS MATERIAL IS 49C (120F).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:USE LOC EXHST VENT W/MIN CAPTURE VELOCITY OF 100 FT/MIN (30
    M/MIN) AT POINT OF VAP EVOLUTION. REFER TO CURRENT EDITION OF
    "INDUSTRIAL VENT:A MANUAL OF  (SUPDAT)
Protective Gloves:NEOPRENE GLOVES. GLOVES OF OTHER CHEM RESIST MATLS
    MAY NOT PROVIDE ADEQ PROT.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENTILATION: REC PRACTICE" PUBLISHED BY ACGIH FOR INFO ON DESIGN,
    INSTALLATION, USE & MAINT OF EXHST SYSTEMS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:30.0F,-1.1C
Solubility in Water:DILUTABLE
Appearance and Odor:GRAY VISCOUS LIQUID W/SLIGHT ETHER & AMMONIA ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS OR STRONG ALKALIES.
Stability Condition to Avoid:AVOID TEMPERATURES >177C (350F), ONSET OF
    POLYMER DECOMPOSITION. THERMAL DECOMP IS DEPENDENT ON TIME &
    TEMPERATURE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
    ACRYLIC MONOMERS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COAGULATE EMULSION BY STEPWISE ADDITION OF
    FERRIC CHLORIDE & LIME. REMOVE CLEAR SUPERNATANT & FLUSH TO
    CHEMICAL SEWER. INCINERATE LIQUID & CONTAMINATED SOLIDS I/A/W
    LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.