RUST-OLEUM-CONCRETE PROTECTION SYSTEM INC -- EPOXY GROUT GP PART A  -- 8030-00N092382
<pre>=====================  Product Identification  =====================

Product ID:EPOXY GROUT GP PART A
MSDS Date:01/01/1996
FSC:8030
NIIN:00N092382
Status Code:A
Kit Part:Y
MSDS Number: CJRXW
=== Responsible Party ===
Company Name:RUST-OLEUM-CONCRETE PROTECTION SYSTEM INC
Address:1326 W 37 PLACE
City:TULSA
State:OK
ZIP:74107
Country:US
Info Phone Num:918-446-6399
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:J. R. C.
Chemtrec Ind/Phone:(800)424-9300
CAGE:TO303
=== Contractor Identification ===
Company Name:RUST-OLEUM-CONCRETE PROTECTION SYSTEM INC
Address:1326 W 37 PLACE
Box:City:TULSA
State:OK
ZIP:74107
Country:US
Phone:918-446-6399
CAGE:TO303

=============  Composition/Information on Ingredients  =============

Ingred Name:BISPHENOL A EPOXY RESIN. LD50 (ORAL, RAT): 11.4 G/KG. LD50
    (DERMAL, RABBIT): >20 ML/KG. LC50 (INHALATION): NON-TOXIC.
CAS:25068-38-6
RTECS #:CE6880000
Minumum % Wt:75.
Maxumum % Wt:95.
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:N/K 
ACGIH STEL:N/K 

Ingred Name:FURFURYL ALCOHOL. LD50 (ORAL, RAT): 0.13 G/KG. LD50
    (DERMAL, RABBIT): 0.7 G/KG. LC50 (INHALATION): 230 PPM/4 HR.
CAS:98-00-0
RTECS #:LU9100000
Minumum % Wt:5.
Maxumum % Wt:15.
Other REC Limits:N/K 
OSHA PEL:200 MG/M3;50 PPM
OSHA STEL:N/K 
ACGIH TLV:40 MG/M3;10 PPM
ACGIH STEL:60 MG/M3;15 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATING BUT WILL NOT
    PERMANENTLY INJURE EYE TISSUE. SKIN: MAY CAUSE SKIN IRRITATION,
    SKIN RASH, OR ALLERGIC REACTION. INHALATION: NO HAZARD IN NORMAL
    INDUSTRIAL USE. HIGH CONCENTRATION	OF VAPORS MAY IRRITATE UPPER
    RESPIRATORY TRACT. INGESTION: HARMFUL IF SWALLOWED. CHRONIC:
    LIMITED EVIDENCE OF MUTAGENICITY. LIMITED TESTS SHOW NO EVIDENCE OF
    TERATOGENICITY. LIFETIME SKIN PAINTING ST UDY WITH MICE SHOWED NO
    EVIDENCE OF CARCINOGENICITY.
Effects of Overexposure:SEE HEALTH HAZARDS.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH EYES WITH WATER FOR AT LEAST 15
    MINUTES. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
    WASH SKIN WITH SOAP AND WATER. GET MEDICAL ATTENTION IF SYMPTOMS
    OCCUR. WASH  CLOTHING SEPARATELY BEFORE REUSE. INHALATION: REMOVE
    TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. GET
    MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=85.C, 185.F
Extinguishing Media:USE ALCOHOL FOAM, CARBON DIOXIDE, OR WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . USE WATER TO COOL CLOSED CONTAINERS TO PREVENT BUILD-UP
    OF PRESSURE.
Unusual Fire/Explosion Hazard:WHEN MIXED WITH HARDENER, A HIGHLY
    EXOTHERMIC REACTION WILL OCCUR IN LESS THAN 30 MINUTES. DOT
    CLASSIFICATION: COMBUSTIBLE LIQUID.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL WITH INERT MATERIAL (E.G., DRY
    SAND OR EARTH), THEN PLACE IN A CHEMICAL WASTE CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT NORMAL ROOM TEMPERATURE, AWAY
    FROM HEAT, SPARKS AND FLAME. DO NOT GET IN EYES, ON SKIN, ON
    CLOTHING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A NIOSH APPROVED RESPIRATOR WITH ORGANIC
    VAPOR CARTRIDGE WHERE VENTILATION IS LOW. WEAR NIOSH APPROVED
    SELF-CONTAINED BREATHING APPARATUS IN CLOSED SPACES.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT TO CONTROL
    AIRBORNE LEVELS.
Protective Gloves:WEAR IMPERVIOUS (NEOPRENE) GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH AND DELUGE SHOWER MEETING ANSI
    DESIGN CRITERIA . WEAR IMPERVIOUS CLOTHING AND BOOTS.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:>93.3C, 200.F
Vapor Pres:<1.0 MM HG @ 68F/20C
Vapor Density:HVR/AIR
Spec Gravity:1.16
Solubility in Water:INSOLUBLE
Appearance and Odor:LIQUID WITH LOW ODOR.
Percent Volatiles by Volume:<1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS, AMINES, BASES, STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    PHENOLICS.
Conditions to Avoid Polymerization:HAZARDOUS POLYMERIZATION MAY OCCUR
    WITH ADDITION OF AMINE.

===================  Toxicological Information	===================

Toxicological Information:SEE INGREDIENTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL IN
    ACCORDANCE WITH LOCAL, STATE, PROVINCIAL, AND FEDERAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:SHIPPING NAME: PAINT. DOT CLASSIFICATION:
    COMBUSTIBLE LIQUID.

=====================  Regulatory Information  =====================

State Regulatory Information:THIS PRODUCT CONFORMS TO CALIFORNIA
    PROPOSITION 65.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.